Remove The Edp Cable - Lenovo IdeaPad Pro 5 Hardware Maintenance Manual

Figure 31. Remove the LCD panel
Go to
https://support.lenovo.com/partslookup
replacement parts:
LCD panel
Removable tape

Remove the EDP cable

Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD module" on page 40
"Remove the hinge cover" on page 42
"Remove the LCD bezel" on page 43
"Remove the Hinges" on page 43
"Remove the LCD panel" on page 44
Step 1. Peel off the tape and then remove the EDP cable from the LCD panel.
Figure 32. Remove the EDP cable
Go to
https://support.lenovo.com/partslookup
replacement parts:
to look up the Lenovo part numbers of the following
to look up the Lenovo part numbers of the following
.
Chapter 4 Removing a FRU or CRU
45