Remove The Fans - Lenovo IdeaPad Pro 5 Hardware Maintenance Manual

Figure 15. Remove the heat sink
Screw specifications
M1.6 x L1.7
Go to
https://support.lenovo.com/partslookup
part:
Heat sink

Remove the fans

Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 28
"Remove the heat sink" on page 34
Step 1. Detach the fan cable connectors and then release the cables from the cable guide.
Figure 16. Detach the fan cable connectors and release cables
Step 2. Remove five screws and then remove the fans.
Number of screws
3
to look up the Lenovo part number of the following replacement
.
Chapter 4 Removing a FRU or CRU
35