Safety Precautions; Important Information - Panasonic MJ-CB800 Operating Instructions Manual

Do not open the cover and put your fingers or utensils such as spoon or fork into the
●
blender jug, feeding tube while the appliance is operating. (For juicer, use the food pusher
or another piece of fruit or vegetable to push it down.)
Do not assemble the spinner when there is food residue left around the container unit.
●
Do not stretch the gasket to avoid deforming.
●
Do not replace any parts of the appliance with non-genuine spare parts.
●
Do not carry the appliance by holding the power cord, feeding tube, container unit, blender
●
jug or mill container. When carrying the appliance, be sure to hold the motor housing with
both hands.
Do not insert any object in the gaps of the appliance.
●
Do not blend more than the working capacity marked on the blender jug. For the mill
●
container, do not place more than the maximum quantity. (P. EN9 "Specifications")
Do not use prohibited ingredients as stated in this instructions. (P. EN6)
●
Do not push the safety lock pin with any implement, such as thin stick etc. (P. EN5)
●
Unplug the plug when the appliance is not in use.
●
Make sure to hold the power plug when unplugging it. Never pull on the power cord.
●
Beware not to trip over or get caught in the power cord while in use.
●
In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance
●
must not be supplied through an external switching device, such as a timer, or connected
to a circuit that is regularly switched on and off by the utility.
Care shall be taken when handling the sharp blades/spinner/spout, emptying blender jug,
●
mill container and during cleaning. Do not clean the spinner, blender blade or mill blade by
bare hand.
Always disconnect the appliance from the supply if it is left unattended and before
●
assembling, disassembling, moving or cleaning.
Switch off the appliance and disconnect from supply before changing attachments or
●
approaching parts that move in use.
Ensure to operate and rest the appliance as stated on specification table. (P. EN9
●
"Specifications")
Ensure to clean the appliance especially surfaces in contact with food after use. (P. EN8
●
"After Use")
This product is intended for household use only.
●
● Do not use the appliance outdoors.
● Do not use the appliance for commercial purpose.
● Do not place the juicer cup or mill container on any heat sources or in a microwave.
● Do not drop the appliance or attachments to avoid damaging it.
● Do not wrap the power cord around the motor housing.
● Make sure the parts or attachments are set firmly before use.
● Do not operate the appliance without ingredients.
● Be sure the blender gasket and mill gasket are attached properly to prevent leakage.
EN4

Safety precautions

CAUTION

Important Information

Please make sure to
follow these instructions.