Related Manuals for Scitec AEGIS-T
Summary of Contents for Scitec AEGIS-T
-
Page 1: User Manual
Aegis Series Telephone User Manual Unpacking your telephone: This package should contain the following: • Telephone base unit • Handset • Coiled handset cord • Straight line cord • This manual... -
Page 2: Installation
The Aegis Two-line Series telephones are designed for use behind a registered PBX system. The telephone user or system installer must supply a RJ-14 two-line modular wall jack to connect this telephone to the PBX system. The PBX “station port” type must be “Industry Standard Analog”... -
Page 3: Adjusting Volume
2. Turn the telephone over so the telephone face is down. 3. Locate the wall-mounting bracket. bracket. 4. Rotate the wall-mounting bracket so that the Scitec “Sun” designs are toward the bottom of the phone. 5. Insert the 4 retaining tabs of the wall-mounting bracket into the 4 slots located near the middle of the telephone. -
Page 4: Ringer Volume
RENs, contact the local telephone company. The REN for this telephone is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). - Page 5 If you experience trouble with this telephone, please contact Scitec, Inc. at (217) 384-6041 for repair or warranty information. If the trouble is causing harm to the telephone network, the Telephone Company may request that you remove this equipment from the network until the problem is resolved.
-
Page 6: Warranty
Authorization Form.” A simple one-page form and complete instructions will be sent to you, to be filled out and returned to Scitec. You will be asked to describe the failure symptoms of your telephone, provide the date purchased (and proof of purchase date if requested), and provide the name of the Scitec dealer or distributor from which the telephone was purchased.
Need help?
Do you have a question about the AEGIS-T and is the answer not in the manual?
Questions and answers