Related Manuals for Scitec 2510D
Summary of Contents for Scitec 2510D
-
Page 1: User Guide
For demanding environments. 2510D 2554W Standard Series User Guide 2510D, 2510D MW, 2510D-e, 2510D-e MW, 2554W, 2554W MW, 205TMW... -
Page 2: Table Of Contents
Table of Contents 205TMW Phone Map 2510D, 2510D MW, 2510D-e, Important Safety Instructions & 2510D-e MW 2510D and 2510D-e Phone Map FCC Interference Information 2510D vs 2510D-e 2510D MW and 2510D-e MW FCC RF Radiation Exposure Phone Map Package Contents... -
Page 3: 2510D And 2510D-E Phone Map
2510D and 2510D-e Phone Map Volume control button on underside of phone Wall jack (on base) Handset Handset jack Base Key pad 2510D MW and 2510D-e MW Phone Map Volume control button on underside of phone Message waiting light www.scitecinc.com STANDARD SERIES USER GUIDE... -
Page 4: 2554W Phone Map
2554W Phone Map Wall jack and Volume control button on underside of phone Handset Handset cradle Base Key pad Handset jack 2554W MW Phone Map Wall jack and Volume control button on underside of phone Message waiting light www.scitecinc.com STANDARD SERIES USER GUIDE... -
Page 5: Package Contents
This clip is to the Scitec website (www.scitecinc.com) for spring-loaded and not removable, so that it updates to this and other Scitec products. cannot be lost. • Turn the telephone over so the telephone face 205TMW is down. -
Page 6: Jacks
2510D vs 2510D-e volume levels Normal to Medium to High. The 2510D has a double-gong bell ringer. The MESSAGE WAITING LIGHT—Indicates phone 2510D-e has an electronic ringer. Everything is ringing or a message is waiting. Responds to else between the models is identical. - Page 7 settings of Normal to Medium to High. The volume jack. Pull down them on the telephone until the will decrease as the switch is moved toward the studs are locked in place. Lift the handset. A dial bottom of the handset. Adjust as desired. tone should be heard in the receiver.
-
Page 8: Important Safety Instructions
Important Safety Instructions can cause electric shock when the appliance is subsequently used. When using your telephone equipment, basic Unplug this product from the wall outlet safety precautions should always be followed to and refer servicing to qualified service reduce the risk of fire, electric shock, and injury personnel under the following conditions: to persons, including the following: •... -
Page 9: Fcc Rf Radiation Exposure Statement
Industry of Canada Requirements This equipment has been tested and found to comply with the limits for a Class B digital Note: This equipment meets the applicable device, pursuant to Part 15 of the FCC Rules. Industry Canada Terminal Equipment Technical These limits are designed to provide reasonable Specifications. -
Page 10: Requirements Of Part 15-Fcc Rules
REN: Z requested, this number must be provided to the telephone company. The USOC Jack for this For warranty and service in Canada, please contact: equipment is RJ11C. Williams Telecommunications A plug and jack used to connect this equipment to 5610 Kennedy Road the premises wiring and telephone network must Mississauga, Ontario, L4Z2A9 Canada... -
Page 11: Care And Maintenance
There are no user-serviceable parts contained in forward with a serial number beginning with XX. this equipment. For all other models please refer to the Scitec website for legacy product documentation. Connection to party line service is subject to state tariffs. - Page 12 Telephone +1 719 638 8821 Fax +1 719 638 8815 info@scitecinc.com scitecinc.com © 2013 Cetis, Inc. Product specifications and descriptions in this document subject to change without notice. Cetis™ and Scitec ® are trademarks or registered trademarks of Cetis, Inc. SCI-Std-UG-092013...
Need help?
Do you have a question about the 2510D and is the answer not in the manual?
Questions and answers