Related Manuals for Scitec AEGIS-10S
Summary of Contents for Scitec AEGIS-10S
-
Page 1: User Manual
Aegis Series Telephone User Manual Unpacking your telephone: This package should contain the following: • Telephone base unit • Handset • Coiled handset cord • Straight line cord • This manual... -
Page 2: Installation
Then place the handset in its cradle. Connect the free end of the coiled handset cord to the jack on LEFT SIDE of the telephone body, marked with a “handset” symbol. This jack is closer to the front of the telephone. -
Page 3: Adjusting Volume
2. Turn the telephone over so the telephone face is down. 3. Locate the wall-mounting bracket. Note the 4 retaining tabs on bracket. 4. Rotate the wall-mounting bracket so that the Scitec “Sun” designs are toward the bottom of the phone. -
Page 4: Ringer Volume
If you experience trouble with this telephone, please contact Scitec, Inc. at (217) 384-6041 for repair or warranty information. If the trouble is causing harm to the telephone network, the Telephone Company may request that you remove this equipment from the network until the problem is resolved. -
Page 5: Warranty
Authorization Form.” A simple one-page form and complete instructions will be sent to you, to be filled out and returned to Scitec. You will be asked to describe the failure symptoms of your telephone, provide the date purchased (and proof of purchase date if requested), and provide the name of the Scitec dealer or distributor from which the telephone was purchased.
Need help?
Do you have a question about the AEGIS-10S and is the answer not in the manual?
Questions and answers