Scitec STC-7003 User Manual
  1. Manuals
  2. Brands
  3. Scitec Manuals
  4. Telephone
  5. STC-7003
  6. User manual

Scitec STC-7003 User Manual

Scitec stc-7003: user manual
Hide thumbs Also See for STC-7003:
Table of Contents

Advertisement

Quick Links

STC-7003 Telephone User Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STC-7003 and is the answer not in the manual?

Questions and answers

Related Manuals for Scitec STC-7003

Summary of Contents for Scitec STC-7003

  • Page 1 STC-7003 Telephone User Guide...

  • Page 2: Telephone Features

    Verify that the package contains the following supplied items: • Telephone base unit • Handset • Coiled handset cord • Straight line cord Assembling your telephone: If you will be wall-mounting the STC-7003, it is best to do the conversion...

  • Page 3: Attaching The Handset

    If you will be using the STC-7003 on a desktop, skip to the section “Attaching the handset” Wall-mounting your telephone: 1) The wall/desk handset clip is located on the front of the phone directly above the speaker grill.

  • Page 4: Operating Instructions

    PBX and voice mail system. Please consult your PBX vendor or installer for more information. Operating instructions: Telephone Options Setup: The user options should be set on the STC-7003 telephone prior to placing it into service. The following eleven options are user-programmable on the STC-7003: •...
  • Page 5 Verify that the phone is connected to a functioning telephone line. Verify that the phone is “on-hook” and that it is in standby mode. In standby mode, the time, date, new call count, and user name (“SCITEC INC.” by default) will be displayed on the LCD. User options are set as follows: 1) Press SET to enter user options setup mode and to select the CONTRAST menu.

  • Page 6: Retrieving A Held Call

    LCD as the number is dialed. After 15 seconds the dialed digits will be replaced by the call length timer. To end a call, place the handset on the telephone base unit, or if using the hands-free speakerphone, press the SPKR key. The call time length will remain on the display for 5 seconds, and then the display will revert to the standby display mode.
  • Page 7 Press the desired one-touch speed dial key M1~M9; the stored number will be dialed automatically. Viewing Caller ID entries: The STC-7003 telephone stores Caller ID data for the last 60 calls received, including “UNAVAILABLE” and “BLOCKED” calls. 1) Press ▼ to view calls starting with the newest call.

  • Page 8: Speed-Dial Memory Key Labeling (Optional)

    A standard telephone headset with a 2.5mm phone plug may be used with the STC-7003 telephone. To use a headset, plug it into the 2.5mm phone jack (labeled with a “headset” symbol) located on the left side of the telephone.

  • Page 9: Warranty

    If the STC-7003 is used with a leased system, permission of the owner of the equipment must be obtained for connection of the telephone because modification of the host system is often required.

Table of Contents