Download Print this page

Brother HL-1218W Quick Setup Manual page 2

Hide thumbs Also See for HL-1218W:

Advertisement

4A
Configuration using the CD-ROM (Windows
NOTE:
If the Brother screen does not appear automatically, go to Computer (My Computer).
(For Windows
8: click the
(File Explorer) icon on the taskbar, and then go to Computer.)
®
Double-click the CD-ROM icon, and then double-click start.exe.
Connection Type
4B
Configuration without using the CD-ROM (Windows
Download the full driver and software package from the Brother Solutions Center.
(For Windows
)
solutions.brother.com/windows
®
(For Macintosh)
solutions.brother.com/mac
After you download the driver and software package, follow the on-screen instructions until the Connection Type screen appears. Refer to
(Windows
).
®
4C
One-push wireless setup for mobile devices
If your wireless LAN access point/router supports automatic wireless (one-push) setup (WPS/AOSS™), you can set up your machine without using a computer.
Press the WPS or AOSS™ button on your
wireless LAN access point/router.
Print using your mobile device
Download "Brother iPrint&Scan" to start using your machine with mobile devices.
solutions.brother.com/ips
Wireless Network Connection
[Recommended]
Select this option if you have a USB cable to
use temporarily for wireless setup.
Select this option if you do not have a USB cable.
Press and hold the WiFi button on your
machine for about 2 seconds. The WiFi
button will light up when connected.
)
®
For USB Connection
For Wireless Network Connection
We recommend preparing a USB cable
to use temporarily during the wireless
setup.
without CD-ROM drive or Macintosh)
®
Wireless setup is now complete.
NOTE:
Before you can use your machine with your mobile device, download
"Brother iPrint&Scan."
Follow the on-screen
instructions until the
Connection Type screen
appears.
Follow the on-screen
Finish
instructions to continue
installation.
NOTE:
If connection is unsuccessful, repeat this step.
Follow the on-screen
instructions to continue
Finish
installation.
NOTE:
If connection is unsuccessful, repeat this step.
4A
Configuration using the CD-ROM
2

Advertisement

loading