Advertisement
BeBa_27962, BeBa_27963, BeBa_27964, BeBa_27965,
BeBa_27966, BeBa_27967, BeBa_27968, BeBa_27969，
BeBa_27970
Sahara Towel Radiator
Please note: Image is for illustrative purposes only and may differ slightly to the
actual product
Multi-person assembly
Tools required
We always recommend using professional
tradespeople to install your product
V1_10.11.20
Advertisement
Table of Contents
Related Manuals for Better Bathrooms Sahara BeBa-27962
Summary of Contents for Better Bathrooms Sahara BeBa-27962
- Page 1 BeBa_27962, BeBa_27963, BeBa_27964, BeBa_27965, BeBa_27966, BeBa_27967, BeBa_27968, BeBa_27969， BeBa_27970 Sahara Towel Radiator Please note: Image is for illustrative purposes only and may differ slightly to the actual product Multi-person assembly Tools required We always recommend using professional tradespeople to install your product V1_10.11.20...
- Page 2 Congratulations on your purchase And welcome to our growing gang of savvy shoppers We're on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So, you can fall in love with your space every single day.
- Page 3 Parts A. 1 x Radiator B. 1 x Air Vent (Bleed Valve) C. 1 x Blanking Cap D. 4 x Wall plug E. 4 x Wall Bracket F. 4 x Washer G. 4 x Wall screw H. 4 x Rail Bracket I.
- Page 4 Installation Please note: Before starting any installation, turn off the water supply. Please note: Before commencing any installation, the desired location should be checked before drilling, that no pipes or wires can be damaged. First, prepare the water supply pipes to match up with the towel radiator and valve dimensions being used.
- Page 5 3. Using the drill and 8mm drill bit, drill into the marked positions then insert the wall plugs and tap flush to the finished wall surface. Please note: If drilling into a tile, it is recommended to tape the wall to prevent the drill from slipping.
- Page 6 6. Align and push the rail brackets on the radiator onto the wall brackets secured to the wall. Secure the two together with the connecting screws provided (insert through the slot in the bracket) and tighten using the Philips screwdriver, be sure not to overtighten.
Need help?
Do you have a question about the Sahara BeBa-27962 and is the answer not in the manual?
Questions and answers