Advertisement
BeBa_26279 to BeBa_26285 , BeBa_27937, BeBa_27938,
BeBa_27939 NAMA1600 NAMW1600 NAMB1600
Nambi Column Traditional Radiator
Please note: Image is for illustrative purposes only and may differ slightly to the
actual product
Multi-person assembly
Tools required
We always recommend using professional
tradespeople to install your product
V2_16.11.22
Advertisement
Table of Contents
Related Manuals for Better Bathrooms Nambi NAMA1600
Summary of Contents for Better Bathrooms Nambi NAMA1600
- Page 1 BeBa_26279 to BeBa_26285 , BeBa_27937, BeBa_27938, BeBa_27939 NAMA1600 NAMW1600 NAMB1600 Nambi Column Traditional Radiator Please note: Image is for illustrative purposes only and may differ slightly to the actual product Multi-person assembly Tools required We always recommend using professional tradespeople to install your product V2_16.11.22...
- Page 2 Congratulations on your purchase And welcome to our growing gang of savvy shoppers We're on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So, you can fall in love with your space every single day.
- Page 3 Parts Please note that Parts are for illustrative purposes only and may differ slightly to the actual product Tools required Spanner Flathead screwdriver Philips screwdriver Tape measure Drill and 8mm drill bit Spirit Level Pencil Sealing tape...
- Page 4 Installation Please note: Before starting any installation, turn off the water supply. Please note: Before commencing any installation, the desired location should be checked before drilling, that no pipes or wires can be damaged. First, prepare the water supply pipes to match up with the towel radiator and valve dimensions being used.
- Page 5 3. Next, position the wall brackets and screw into place using the screws provided with the Philips screwdriver. 4. Once all brackets are secure, hang the radiator until fixed firmly into place and adjust so that the radiator aligns with the pipework. Please note: You may need two people to hang the radiator, depending on the model purchased.
- Page 6 After installation After the above installation, turn on the water supply and using the flathead screwdriver, open the air vent via the central screw, open the inlet valve and let the water rush into the radiator. Check all connections for leaks. ...
Need help?
Do you have a question about the Nambi NAMA1600 and is the answer not in the manual?
Questions and answers