Connecting The Monitor And Stand; Choosing A Workstation - Sceptre D40 User Manual

Connecting the Monitor and Stand

Connecting the Monitor and Stand
=
Align the stand's four tabs with the slots on the bottom of the monitor.
=
Insert the tabs into the slots.
=
Slide the stand towards the front of the monitor.
Figure 1: Monitor and Stand Connection

Choosing A Workstation

When choosing an appropriate workspace, keep these few things in mind:
A sturdy, level surface.
An electrical wall outlet and a telephone wall jack near the computer.
At least 3-inch clearance at the back of the computer to allow for the
required airflow.
Do not place near a window. Exposing the Monitor to direct sunlight for
extended periods may damage the unit.
You may want to use a desk lamp to adjust the ambient lighting for your
viewing comfort.
A viewing filter is recommended to reduce eye stress and fatigue.
— 2 —