Brother P-touch PT-E300M User Manual page 36

EDITING A LABEL
 Advanced
1
Enter text.
Example: Create a label "1A-A02", "1A-A03", "1A-A04", "1A-
B01", "1A-B02", "1A-B03", "1A-B04" from "1A-A01" by using
this function.
2
Press the Shift key and then press the Serialize key. Select
"Advanced" by using the
3
Select the first character(s) that you want to increase by using the
, , or
Example: Select 1 of A01.
4
Select Increment and Count by using the
value by using the
Example: When you want to increase the number by one four
times, set Increment: 1, Count: 4.
5
Select the second number that you want to increase by using the
, , or
Example: Select A of A01.
You cannot select the first character(s) as it is greyed out.
6
Select Increment and Count by using the
value by using the
Example: When you want to increase the number by one twice,
set Increment: 1, Count: 2.
6 7
Press the OK or Enter key to display the screen that you set.
Example:
• When you press the Shift key and then press the Serialize
key, you can do the setting again. After redo the setting, the
message "OK to overwrite the Data after This Position?" is
shown. If it's ok to overwrite, press OK key.
• You can select All/Current/Range when printing as there are
multiple pages of labels.
• To print labels refer to "LABEL PRINTING" on page 41.
33
Entering a Serialize Label
or key and press the OK key.
key and press the OK or Enter key twice.
or key. Press OK or Enter key.
key and press the OK or Enter key twice.
or key.
or key and set the
or key and set the