Philips HD9257 User Manual page 12

Table of Contents

Advertisement

12 ENGLISH
Tip
During cooking, if you want to change the cooking time or
temperature, press the corresponding up or down button at any time
to do so.
To pause the cooking process, press the start/pause button. To
resume the cooking process, press the start/pause button again to
continue the cooking process.
The device is automatically in pause mode when you pull out the pan
and the basket. The cooking process continues when the pan and the
basket are put in the appliance again.
Note
If you do not set the required cooking time within 30 minutes, the
appliance automatically shuts off for safety reasons.
Some ingredients require shaking or turning halfway through the
cooking time (see 'Food table'). To shake the ingredients, pull out the
pan with the basket, place it on a heat resistant work top, slide the lid
and press the basket release button to remove the basket and shake
the basket over the sink. Then put the basket into the pan, and slide
them back into the appliance.
If you set the timer to the half of the cooking time and you hear the
timer bell it is time to shake or turn the ingredients. Be sure to reset
the timer to the remaining cooking time.
9 When you hear the timer bell, the cooking time has
elapsed.
Note
You can stop the cooking process manually. To do this, press the start/
pause button.
When the cooking process is finished, the light inside the device turns
on automatically.
10 Pull out the pan and check if the ingredients are ready.
Caution
The Airfryer pan is hot after the cooking process. Always place it
on a heat resistant work top (eg. trivet, etc.) when you remove
the pan from the device.
Note
If the ingredients are not ready yet, simply slide the pan back into the
Airfryer by the handle and add a few extra minutes to the set time.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents