Table of Contents
Advertisement
INSTALLATION
4. Use supplied M5 supplied Hex tool to loosen D1005 terminal cap by turning counterclockwise
5. Set D1005 terminal cap in safe place
6. Route cable(s) into D1006 terminal housing junction box through user-supplied cable gland and
seal using the recommended gland installation practices. There are two conduit entries on models
without the-BD Breather drain option.
Conduit Entries are M20 x 1.5 Use appropriate Adapter with Nylon Washer
or O-ring to keep ingress protection follow guidelines of the manufacturer of
gland or adapter
Figure 2. Removing D1005 terminal cap
105607312018 D101-(X)-P3807-
PVE-BD INSTALLATION MANUAL
REV-0
19
Advertisement
Table of Contents
