Pn-3001/2/3 Ext - GAGEMAKER PN-3000 Series Operation Manual

Pin Nose Gages and Seal Gage Operation Manual
6
5
4
Item Description
1 Dial Indicator (#803)
2 Contact Points
3 End Cap/Slider Assembly (Factory Installed)
4 Slider Knob
5 Slider Spacer
6 T-Nut
PN-3001 Pin Nose Diameter Gage 2 3/8" - 5 1/2" (0"-5.750")
PN-3002 Pin Nose Diameter Gage 6" - 9 5/8" (0"-9.750")
PN-3003 Pin Nose Diameter Gage 10" -13 3/8" (0"-13.750")

PN-3001/2/3 Ext.

System Component
3
2
Qty
1
2
1
1
1
1
HOW TO ORDER
1. Select the PN-3001 Ext. Series gage
model, based on the size of the connector.
2. Specify the distance from the face of the
connector to the measuring plane "X".
3. Specify the contact point diameter "T"
needed for selection of the proper contact
points (not included in the price of the gage
and sold individually).
Specify the stand-off plate model, if necessary
"Y" (sold separately).
6
PN-3000/T
Standoff Plates
(2 per set)
Customer to Specity
Thickness of Taper Plates
(See Page 12)
Customer to Supply
Standoff and Point Size