Lennox iComfort 10F81 Homeowner's Manual page 22

HOME
Open connection (no password required)
DS9
Secure connection (password required)
(lock icon is present)
BSG
Signal strength. For best results, the higher the
bar levels, the more reliable a connection.
Figure 37. Typical Connection Type and Signal Strength
NOTE - The router info button provides information concerning the home
Wi-fi connection (i.e, RSSI, IP address, MAC address and wait state) all of
which may be helpful in troubleshooting network connection issues).
3. If connection is successful the screen will return to the available
networks screens. Press X to return to the previous screen. If the
connection was successful it will be listed connected as exampled
below.
WI-FI SETTINGS
connection
status
Press to see
connection status
Must setup a network connection before registering thermostat
Wi-Fi
9:39 am May 23, 2012
Figure 38. Network Connected
507342-01
WI-FI
thermostat
AP3
not
connected
enabled
registered
press to change
press to change
press to enable //
thermostat
wireless network
disable Wi-FI
registration
Zone 1
ESTABLISHING A WI-FI CONNECTIONS TO A HIDDEN
NETWORK
1. When connecting to a hidden network, press the add new network
icon to continue.
2. Enter the network name (SSID) using the onscreen keyboard and
press the save button.
3. By default security is set to none. To enable the security option, press
the security is none icon and select the security used for the Wi-Fi
network (WEP, WPA or WPA2).
4. Press the connect icon to continue.
5. Using the on-screen keyboard, enter the password (security key). If the
network name or security key combination is incorrect or incorrectly
type, and access to the specified network failed, a message will alert
you to retry.
network name (SSID)
password
Figure 39. Network Manual Setup (Hidden Network)
X
6. If connection is successful the screen will return to the available
networks screens. The network successfully connected will be listed
and shown as connected as exampled in figure 38.
Method 2 — Connection Status Method
1. Press connection status; this screen shows a graphical view of the
current connection status.
?
Page 22
press any line to edit it
security is
WPA
connect