Using The Web Portal; Screen-Saver - Lennox iComfort 10F81 Homeowner's Manual

NOTE - Firmware updates will not affect installer or user thermostat settings.
Both will be retained after the update.
WI-FI SETTINGS
connection
Wi-Fi
status connected
enabled
press to see press to enable /
press to change
connection status disable Wi-Fi
wireless network
NOTE -
If any downloads are available for the thermostat they will start down­
loading right away. After the new firmware has been downloaded and
the thermostat is ready to update itself, the thermostat screen will tem­
porarily go blank and running units may cease operation while the sys­
Connection to server has not bee established or it has been lost.
tem is being reset to accommodate the new changes. This is normal
Please wait until a connection is established.
and can last a couple minutes.
Figure 43. Registration for Online Access
Using the Secure Web Portal
Access all the great Wi-Fi enabled features on your iComfort
from our secure web portal.
www.myicomfort.com
After signing in, you'll be able to view your iComfort system settings, adjust
the temperature and view reminders and alerts – just as you would on your
iComfort thermostat at home. With a familiar look and settings this simple,
you should feel right at home.
From the web portal welcome page, you may also click on links to launch an
interactive demo or learn more about iComfort.
507342-01
AP3
thermostat
registered
press to change
press to search
thermostat
for new update
registration
®

Screen-Saver

You can also customize the screen-saver by uploading your own photo on·
www.myicomfort.com under the tab "s". Image must be 800x480 DPI in
JPG format.
firmware
update
auto
HOW DO I TURN ON SCREEN-SAVER
1. From the thermostat Home screen, press
2. Press the display setting button.
3. Press the screen saver button.
4. From the pop-up menu, select either on for the default screen-saver
or skins for your custom uploaded image. The skin picture will appear
after 30 seconds of inactivity.
• When set to off, the screen stays on.
• When set to on, after 30 seconds of inactivity the screen will go
blank
• When set to skins and no skin or custom image has been
uploaded, the screen will display LENNOX after 30 seconds of
inactivity. If a skin or custom image has been uploaded, after 30
seconds of inactivity, the image will be displayed.
thermostat
Page 26
.