Table of Contents
Advertisement
EN
50
TROUBLESHOOTING
Symptoms
Appliance does
not operate.
Buttons may not
function properly.
Control panel has powered off due to inactivity.
• This is normal. Press the Power button to turn the
appliance on.
Appliance is unplugged.
• Make sure that the cord is plugged securely into a working
outlet.
Water supply is turned off.
• Turn the water supply tap completely.
Controls are not set properly.
• Make sure that the programme is correctly set. Close the
door and press the Start/Pause button.
Door is open.
• Close the door and make sure that nothing is caught under
the door preventing it from closing completely.
Circuit breaker/fuse is tripped/blown.
• Check house circuit breakers/fuses. Replace fuses or reset
breaker. The appliance should be on a dedicated branch
circuit. The appliance will resume the programme where it
stopped once power is restored.
Control needs to be reset.
• Press the Power button, then reselect the desired
programme and press the Start/Pause button.
Start/Pause was not pressed after a programme was set.
• Press the Power button, then reselect the desired
programme and press the Start/Pause button. The
appliance is turned off if the Start/Pause button is not
pressed within a certain time.
Extremely low water pressure.
• Check another tap in the house to make sure that
household water pressure is adequate.
Appliance is heating the water or making steam.
• The drum may stop operating temporarily during certain
cycles, while water is safely heated to a set temperature.
The Child Lock option is activated.
• Deactivate the Child Lock option if necessary.
Possible Cause & Solution
Advertisement
Table of Contents
