LG F6V10 TSE Series Owner's Manual page 39

Using the Appliance Remotely
Remote Start
Use a smartphone to control your
appliance remotely. You can also
monitor your cycle operation so you
know how much time is left in the cycle.
Using this function
1
Put the clothes into the drum.
• If desired, add bleach or fabric
softener to the appropriate areas of
the dispenser.
2
Press the Power button.
3
Press and hold Remote Start button
for 3 seconds to enable the remote
control function.
4
Start a cycle from the LG ThinQ
application on your smartphone.
NOTE
• Once this function is enabled, you can
only start a cycle from the LG ThinQ
smartphone application. If the cycle is
not started, the appliance will wait to
start the cycle until it is turned off
remotely from the application or this
function is disabled.
• If the door has been opened, you can
not start a cycle remotely.
Disable this function manually
When this function is activated, press
and hold the Remote Start button for 3
seconds.
SMART FUNCTIONS
Wireless LAN Module
Specifications
Model LCW-004
Frequency 2412 to 2472 MHz
Range
Output IEEE 802.11b: 17.82 dBm
Power
IEEE 802.11g: 17.72 dBm
(Max.)
IEEE 802.11n: 16.61 dBm
Wireless function S/W version: V 1.0
For consideration of the user, this device
should be installed and operated with a
minimum distance of 20 cm between the
device and the body.
Standby Power Consumption
Standby power consumption
Network standby power
consumption
The period of time after which
the power management
function, or a similar function,
switches the equipment
automatically into standby
and/or off mode and/or the
condition providing
networked standby
Open Source Software Notice
Information
To obtain the source code under GPL,
LGPL, MPL, and other open source
licenses, that is contained in this
product, please visit http://
opensource.lge.com.
39 EN
0.5 W
2.0 W
20
minu
tes