Valcom V-1054 Manual

ONE-WAY AMPLIFIED CORNER SPEAKER
INTRODUCTION
The interior corner speaker, the V-1054, is a 8"
Speaker/Amplifier Assembly capable of
reproducing paging as well as back ground
music. The speaker has an externally
accessible volume control that is screwdriver
adjustable. The enclosures are made of steel
with a durable powder coated finish. The color
of the enclosures can easily be changed to
match any decor. A cloth covered detachable
grille is included. The speaker requires
-24VDC, 50mA (1 Valcom power unit).
Dimensions/Weight

10.00"H x 12.00"W x 4.50"D
(25.4cm H x 30.48cm W x 11.43cm D)

3.0 lbs (1.36 kg)
INSTALLATION
Typical Connections
NOTE: Do not connect this speaker directly to a
25/70/100 Volt amplifier as damage to both the
amplifier and speaker may occur. A V-1095 may
be used to allow the use of Valcom self-amplified
speakers on 70 Volt speaker lines.
Page
Out
Valcom Page
Control
Mounting
Remove cloth covered grille from baffle. Place
speaker in the desired mounting location. Mark
"keyhole" slot for mounting (see figure 1). After
making the required connections, secure baffle
to wall with a suitable mounting screw (#10 sheet
metal screw or similar). Attach cloth covered
grille to baffle.
V-1054
COVERAGE
The area covered by a wall speaker is typically
(Tip/A)
600 square feet.
(Ring/B)
One-Way
(-24VDC)
Amplified
Speaker
(Gnd)
Wire Run (Feet)
Valcom –24VDC
VDC Power Supply
1
FIGURE 1
Number of Speakers per Audio Run
22 AWG
400 100
800 50
1600 25
Number of Speakers per Power Run
1 Watt Interior
Speakers 22 AWG
30 200 feet
15 400 feet
7 800 feet
Issue 1
24 AWG
60
30
15
24 AWG
125 feet
250 feet
500 feet
947674