Valcom V-1020C Installation Manual

8" ceiling speaker with bridges

Hide thumbs Also See for V-1020C:

Download this manual

All manuals and user guides at all-guides.com

Page 1 All manuals and user guides at all-guides.com...
Page 2 All manuals and user guides at all-guides.com Required tools for installation of a V-1020C speaker with V-9914 bridge.
Page 3 All manuals and user guides at all-guides.com First, cut a pre-measured hole in the ceiling tile.
Page 4 All manuals and user guides at all-guides.com Using the bridge as a guide, determine the screw holes for the ceiling tile.
Page 5 All manuals and user guides at all-guides.com Align the speaker with the holes in the ceiling tile.
Page 6 All manuals and user guides at all-guides.com Align the speaker with the bridge on either side of the ceiling tile.
Page 7 All manuals and user guides at all-guides.com Attach all three pieces with the provided hardware.
Page 8 All manuals and user guides at all-guides.com Connect all wiring to the screw cages on the speaker.
Page 9 All manuals and user guides at all-guides.com Place the speaker assembly in the ceiling grid.
Page 10 All manuals and user guides at all-guides.com Lower the speaker assembly into position in the ceiling grid.
Page 11 All manuals and user guides at all-guides.com Insert the included volume control knob and adjust the speaker volume...
Page 12 All manuals and user guides at all-guides.com ...or adjust the speaker volume with a flat blade screwdriver.
Page 13 All manuals and user guides at all-guides.com...