Table of Contents
Advertisement
REINSTALL OPERATOR TO GATE
9
Reinstall operator to the post and gate brackets securing with the hairpin clips. Once you have verifi ed that the operator is level
and the 1/4" gap between the operator and the extension bracket has been maintained, tighten all of the post and gate bracket
supporting hardware.
IMPORTANT NOTE: When tightening the ribbed neck bolts that hold the extension bracket to the post bracket, it is necessary
to alternate between the bolts when tightening to ensure a correct alignment and to ease the drawing of the bolts through the
brackets.
10
WARNING SIGN PLACEMENT
Warning placards MUST be installed on both sides of
the gate and in plain view.
Gate Post
Fence
Gate
Gate Travel
Path
To prevent SERIOUS INJURY or DEATH from a moving gate:
• Install warning signs on the front and back of the gate
in PLAIN VIEW.
• Permanently secure each warning sign in a suitable
manner using fastening holes.
Moving Gate Can Cause
Injury or Death
KEEP CLEAR! Gate may move at any
time without prior warning.
Do not let children operate the gate or
play in the gate area.
This entrance is for vehicles only
Pedestrians must use separate entrance
17
Hairpin Clip
Installation
Advertisement
Table of Contents
