Sanyo SAP-K181GJH Technical & Service Manual page 68

3. ON/OFF Program Timer
H
ON OFF
TIMER ON display
during counting
H
OFF
TIMER OFF display during
counting after 3 hours
has elapsed.
NOTE
OI-332-19EG
Using the 12-Hour ON and OFF Timer (continued)
A combination of the TIMER ON and TIMER OFF modes, this function
allows you to specify the time that the unit turns on and the time when
it turns off.
(Example) The unit will turn on three hours from now, and turn off five
hours from now.
Timer setting
Stop
3 hours
5 hours
Setting procedure:
STEP 1 Use the procedure described in the ''1. TIMER ON
mode'' section on the preceding page to set the timer
to turn the unit on three hours from now.
STEP 2 Use the procedure described in the ''2. TIMER OFF
mode'' section on the preceding page to set the timer
to turn the unit off five hours from now.
The display changes immediately to its status previous to timer
•
setting, but the
Press the TIMER SET button to display the time remaining on the
•
timer in seconds.
Note that it is not possible to check both the ON and OFF timer
•
settings. The timer setting that will occur first is given preference
and displayed.
The timer setting that will occur first is the one with the shorter time
setting.
Cancellation procedure: Press the TIMER ON button and TIMER OFF
Set the ON and OFF Timers simultaneously.
•
Unless you set the 12-Hour ON and OFF Timers at the same time,
they may not operate at the specified time.
Operate
2 hours
or indication remains.
button once again.
19