Related Manuals for HelloBaby HB6550
Summary of Contents for HelloBaby HB6550
- Page 1 Ver: 1.4 User Manual 2.4GHz Digital Wireless Video Baby Monitor Model: HB6550 The pictures are for reference only, please subject to practicality. www.hellobaby.net.cn service@hellobaby.net.cn...
- Page 2 Thank you for purchasing the HB6550 Baby Monitor. With our baby monitor, you could see and hear your baby sleeping or playing in their room anytime. Please retain your original dated sales receipt for your records. For warranty service of your product, you will need to provide a copy of your dated sales receipt to confirm warranty status.
- Page 3 . The units do not appear to operate normally or exhibits a distinct change in performance; . The units have been dropped or the enclosure damaged; 2. WARRANTY TERMS We offer one-year warranty from the original purchase date against defects in workmanship and materials.
-
Page 4: Parent Unit Overview
5.3 INFRARED NIGHT VISION (AUTOMATIC) The infrared night vision function allows the camera to pick up images in dark or low light conditions. In this mode, only black and white images will be displayed on the onitor,the optimum image lie in where baby unit is 6ft (2m) away from object. camera is in night vision mode, the icon will be displayed on the top of screen. -
Page 5: Digital Zoom
6. 3 BABY UNIT OVERVIEW: Light sensor Antenna Infrared LEDs Speaker Lens Power LED Pair key DC-Jack Temperature sensor 7. KEY OPERATION 7.1 TURN ON/OFF Press and hold the power key for 3 seconds to turn on / off the parents unit. 7.2 UP ▲... -
Page 6: Add Camera
new baby unit, follow the procedure below: Note : Camera icon with " "means it is well registered. You should select and pair with the camera icon without " " sign. 8.1 .1 ADD CAMERA 1. Press the MENU key then the menu will pop up; 2. -
Page 7: Temperature Alarm Setting
8.4.1 TEMPERATURE ALARM SETTING 1. Press the ◀/▶/▲/▼ key to select for turning on alarm function; Press to confirm; 2. Press the ◀/▶ / ▲/▼ key to select for turning off alarm function; Press to confirm; 8.4.2 SET TEMPERATURE HI/LO ALERT LIMITS 1. -
Page 8: Language Setting
screen of the parent unit. When the baby unit detects any sounds louder than the sensitivity level, it will start transmitting the signal to the parent unit again and turn on the screen of the parent unit. To change the VOX level, please follow the below instructions. 1. -
Page 9: Troubleshooting
10. TROUBLE SHOOTING * The power adapters may not be properly connected; * Confirm that the camera and monitor are ON; No reception on the * Camera may be far away from the monitor; monitor * Camera and monitor may not be properly paired; follow PAIRING instruc ons; * Move the monitor close to the camera;... - Page 10 FCC& ISDE Statement This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.
- Page 11 Hereby, videotimes declares that the radio equipment type is in compliance with RED Directive 2014/53/EU. The full text of the EU declaration of conformity is available on the website: www.hellobaby.net.cn Model: HB6550 Responsible Party(US): Startline LLC Add: 22 Hazelwood Drive, Jericho, NY 11753 Tel: 1-516-681-3729 Authorized UK Representative(UK): APEX CE SPECIALISTS LIMITED Add: 89 Princess Street,M14HT,UK info@apex-ce.com...
- Page 12 WARNING Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3 ft (0.9 m) away). Do not remove this tag. AVERTISSEMENT DANGER D’ÉTRANGLEMENT: Des enfants se sont ÉTRANGLÉS avec des cordons électriques. Garde le cordonélectrique hors de la portée des enfants(à plus de 0.9m/3 pi du lit d’enfant).
Need help?
Do you have a question about the HB6550 and is the answer not in the manual?
Questions and answers
I didn't receive a manual in my box, and the camera will not light up to even start the process of using this. I've tried switching power cords with each other and multiple electrical outlets to no avail.
If the HelloBaby HB6550 camera does not light up and the manual is missing, follow these steps:
1. Make sure the power adapter is properly connected to both the camera and a working power outlet.
2. Check that the power adapter is providing the correct output (5V DC, 1A).
3. Press the power button on the camera after plugging it in.
4. If there is still no light, try another compatible power adapter or outlet.
5. If the camera still does not respond, try unplugging and plugging it back in.
If none of these steps work, the device may be faulty.
This answer is automatically generated
my monitor wont turn on after plugging it in with an incorrect cord I replaced the battery but still wont turn on. will this unit work without the battery using the ac cord alone?
Yes, the HelloBaby HB6550 monitor can work without the battery when using the AC cord, as it is powered by a corded electric source.
This answer is automatically generated
What is the model of the microphone inside the camera?
The volume doesn't work. It is turned up to five.
How to disassemble the camera? Thank you.
My monitor does not turn anymore and I have only had it for about 1.5 years.