Safety Advice - Electrolux E8SI1-80BM Instruction Book

Thank you for choosing an Electrolux product. In order to ensure the best results, always use original
Electrolux accessories and spare parts. They have been designed especially for your product.
This product is designed with the environment in mind. All plastic parts are marked for recycling
purposes.
It may be possible that your steam station does not produce steam immediately after filling it
with water. The reason for this is that air trapped in the inner system can delay this function a few
seconds. Please be patient and try it again by pressing the steam button. For your convenience
the steam will be produced after you release the steam button for a few seconds and it is not
necessary to press the button all the time. Find out your rhythm for the best steaming result.
INSTRUCTION MANUAL
Graphics and drawings in this manual are solely for illustration purposes and are subject to variations
from actual product.
Read all instructions carefully before using the appliance for the first time.
Keep this manual for future reference.
COMPONENTS
A. Hot soleplate indicator
B. Water spray nozzle
C. Light indicator for heat-up/cool-down
D. Headlight illuminating ironing area
E. Touch screen for temperature-steam
programme selection
F. Reminder for Flush Clean & replacing Soft
Water Activator
G. Steam jet button
H. Spray button
I. Steam on/off button

SAFETY ADVICE

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning the use of the appliance by a person responsible for their safety.
• Keep the appliance and its power cord out of reach of children. Children should be supervised to
ensure that they do not play with the appliance.
• Cleaning and user maintenance shall not be performed by children without supervision.
• The appliance can only be connected to a power supply which voltage and frequency comply with the
specifications on the rating plate.
• The iron is not to be used if it has been dropped, if there are visible signs of damage on the iron or its
cord or if it is leaking.
• The appliance must only be connected to an earthed socket.
• If the appliance or the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similar qualified person, in order to avoid hazard.
• The iron must be used and rested on a stable surface. When placing the iron on it's stand, ensure that
the surface on which the stand is placed is stable.
• Never leave the appliance unattended while connected to the supply mains.
• The appliance must be switched off and the main plug withdrawn each time after use, before cleaning
and maintenance.
• The plug must be removed from the socket outlet before the water reservoir is filled with water.
• The main cable must not come into contact with any hot parts of the appliance.
• Do not immerse the appliance in water or any other liquid.
www.electrolux.com
J. Power cord
K. Flush Clean button
L. Soft Water Activator, replaceable
M. Water tank with max level indicator
N. Cord wrap facility
O. RESILIUM anodized ski-sloped soleplate
P. Water fill & Water Softener System cover
Q. Iron heel
R. Water filling container
EN
CNS
CNT
KR
ID
TH
VN
5