Basic Connections; Connecting To A Conventional Tv (Example 1) - Sanyo DWM-450 Instruction Manual

Sanyo dwm-450: instruction manual

Hide thumbs Also See for DWM-450:

Quick manual (8 pages)

Table Of Contents

Table of Contents

Connecting to a Conventional TV (Example 1)

Connect the DVD video player to your TV.

To AC 120V, 60Hz

Notes:

•

Please refer to your TV instruction manual.

•

When you connect the DVD video player to your TV, be

sure to turn off the power and disconnect both units from

the wall outlet until all the connections have been made.

•

If your TV has one audio input jack, connect the AUDIO

OUT jacks of the DVD video player to a Y-cable adapter

(not supplied), then connect it to the TV Audio input. Please

consult your local audio/video dealer.

•

Do not connect the DVD video player to a VCR directly.

The playback picture will be distorted because DVD video

discs are copy protected.

Using the S-VIDEO OUT jack

Note:

Please follow the steps before turn on the power.

1. If your TV has the S-video input jack, connect the DVD

video player with the S-video cable (not supplied). (The

VIDEO OUT jack connection is not necessary.)

You can enjoy clearer picture playback.

2. You also need to connect the left and right audio cables

(not supplied) to the AUDIO OUT jacks of the DVD video

player and the Audio input jacks of the TV.

DVD video player

P r

P b

C O A X I A L

AUDIO OUT

S-VIDEO OUT

To S-VIDEO

OUT jack

*Please consult your local audio/video dealer.