Connecting To An Amplifier With Dolby Digital Decoder Or Mpeg2 Decoder (Example 4); Connecting To A Digital Amplifier (Example 5) - Sanyo DWM-450 Instruction Manual

Notes:
•
For VIDEO connection, please refer to "BASIC CONNECTIONS".
• Please refer to the instruction manual of your amplifier.
• When you connect the DVD video player to your amplifier, be sure to turn off the power and disconnect both units from the
wall outlet until all the connections have been made.
Connecting to an Amplifier with Dolby Digital Decoder or MPEG2 Decoder
(Example 4)
*Coaxial audio cable
(not supplied)
To COAXIAL jack
To enjoy Dolby Digital sound
Select "DOLBY DIGITAL BITSTREAM" in "Setting Digital Out"
on the INITIAL SETTINGS. (See page E33.)
To enjoy MPEG2 sound
Select "MPEG BITSTREAM" in "Setting Digital Out" on the
INITIAL SETTINGS. (See page E33.)

Connecting to a Digital Amplifier (Example 5)

You can enjoy 2 Channel Digital Stereo Sound.
*Coaxial audio cable
(not supplied)
To COAXIAL jack
To enjoy 2 Channel Digital Stereo sound
Select "DOLBY DIGITAL LPCM" and "MPEG LPCM" in "Set-
ting Digital Out" on the INITIAL SETTINGS. (See page E33.)
To digital audio input
Front left
speaker
P r
Y L
Surround left
speaker
R
P b
S-VIDEO OUT
C O A X I A L AUDIO OUT
To digital audio input
P r L
Y
R
P b
C O A X I A L AUDIO OUT S-VIEDO OUT
Amplifier with Dolby Digital Decoder or MPEG2 Decoder
Center
speaker
*Please consult your local audio/video dealer.
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are trademarks
of Dolby Laboratories.
Amplifier with a coaxial digital input
Front left
speaker
*Please consult your local audio/video dealer.
-E12-
Front right
speaker
Subwoofer
Surround
right speaker
Front right
speaker