Table of Contents
Advertisement
Preparations
•
Turn on the power (TV, Audio System, AV amplifier, etc.).
•
Select the video input source on your television.
(Please refer to your TV instruction manual.)
•
Select the playback picture size according to the aspect
ratio of the TV. (For more details, see "Setting Display" on
page E32.)
4:3 LB
4:3 PS
(Letterbox):
(Panscan):
•
Select the audio input source (Audio System, AV amplifier,
etc.).
•
When you use TV with Progressive-scan capability and
connect it to the COMPONENT VIDEO OUT jacks of
the DVD video player (see page E10), you must select
the PROGRESSIVE mode. (For more details, please
refer to your TV instruction manual.)
Note:
If you use a Conventional TV, skip this section.
1. Turn on the power (TV and DVD video player).
2. In "NO DISC" mode, press and hold down [a] on the
DVD video player until "
pears briefly on the TV screen.
If you want to change the setting again, press and
hold down [a] on the DVD video player until "
(INTERLACE) appears briefly on the TV screen.
Note:
In "
" mode, the closed caption may not appear
on the TV screen.
Important Note:
•
This instruction manual explains the basic instruction
of this unit using the remote control.
•
Some DVD video discs have different functions that may
not be explained in this instruction manual. You may
need extra instruction. In this case, please follow the
instructions displayed on the TV screen or jacket or case
of the disc.
•
"
" may appear on the TV screen during operation.
This icon means that the function is not available on the
disc now.
BASIC OPERATION
TV
16:9 :
" (PROGRESSIVE) ap-
"
-E15-
Basic Playback
Notes:
•
Do not touch the disc tray while it is moving.
•
Never place anything except a disc on the disc tray. For-
eign objects can damage the unit.
•
Do not apply excessive force to the disc tray.
•
Only one disc must be placed on the disc tray at a time.
When operation buttons are pressed, that operation is dis-
played on the TV screen. The display turns off after several
seconds.
Disc tray
q
ON
z/ON
z
S L O W
PREV
S T O P
f
REV
P L AY
d
1
4
7
+10
AUDIO SUBTITLE RANDOM Z O O M
SETUP
1. Press [z/ON].
•
"SANYO" logo appears on the TV screen.
•
The power indicator lights on the front panel.
2. Press [q] (or [ q OPEN/CLOSE] on the remote control).
•
"q" appears on the TV screen and the disc tray opens.
•
The DISC IN indicator blinks on the front panel.
Note:
To open or close the disc tray, be sure to press [q] (or
[ q OPEN/CLOSE] on the remote control). Do not push
back the disc tray by your hand.
3. Place the disc with the label facing up on the disc tray.
For 5-inch (12cm) disc
a z/ON
OPEN/CLOSE
OPEN/
q
CLOSE
k
NEXT
n
e
FWD
a
c
PLAY
2
3
5
6
8
9
P R O G R A M
0
M E N U
or
For 3-inch (8cm) disc
Hide quick links:
Advertisement
Table of Contents
