Table of Contents
Advertisement
Before Starting
This unit can play back the CD that has recorded music data,
MP3 files.
•
The file system is ISO9660 Level 1 and Level 2.
•
If the CD has both audio CD tracks and MP3 files, only
audio CD tracks are played.
•
It may take 30 seconds or more for this unit to read MP3
files. It depends on its structure.
•
This unit can recognize up to 256 files or folders per disc.
The CD with 257 files or folders and over is not available
to this unit.
•
MP3 CDs may not be played in the recorded order.
1. Please use the MP3 software with the function that
can record data alphabetically or numerically.
2. Please avoid making many sub-folders by
However, some CD-R/RWs cannot be played back depend-
ing on the recording conditions.
Before playing back MP3 files, please read the following.
MP3 CD
•
MP3 files must have the extension letters, ".MP3" or
".mp3".
•
Standard, sampling frequency, and the bit rate:
MPEG-1 Audio
32kHz, 44.1kHz, 48kHz
32kbps ~ 320kbps (constant bit rate or variable bit rate)
•
The recommended recording setting for a high-quality
sound is 44.1kHz of sampling frequency and 128kbps of
constant bit rate.
LIMITATIONS ON DISPLAY
Available letters for display are the following: capital or small
alphabets of A through Z, and numbers of 0 through 9.
CAUTION:
•
Some MP3 CDs cannot be played back depending on the
recording conditions.
•
The CD has no music data or non-MP3 files cannot be
played back.
•
The WMA files cannot be played back.
Need help? Call
1-800-813-3435
MP3 CD OPERATION
preference.
-E27-
MP3 CD Playback
z
S L O W
PREV
STOP
f
REV
d
1
Number
4
7
+10
AUDIO SUBTITLE RANDOM Z O O M
SETUP
ENT
TOP MENU
1. Load the disc with the label facing up on the disc tray.
(Please refer to "BASIC OPERATION" on page E15.)
•
"FILE" screen appears.
Note:
Some discs may start playback automatically.
2. To select the folder or file, do one of the following:
•
Press the number button(s).
Example:
To select No.3, press [3].
To select No.10, press [+10], then [0].
To select No.24, press [+10], [+10], then [4].
•
Press [4], [a], [b] or [b] to select the folder or file,
and press [ENT].
•
The file menu of the selected folder appears.
•
If the file is selected, the selected file playback starts.
3. Repeat step 2 to select the file in the file menu.
Playback starts.
Note:
If the disc is loaded with the label side downward, or if a badly
scratched disc is loaded, "NO DISC" or "NO PLAY" appears
on the TV screen. If this occurs, load the disc correctly or
replace the disc.
Stopping Playback
Press [n STOP] during playback.
q
k
S T O P
NEXT
n
e
P L AY
FWD
a
c
2
3
6
5
8
9
P R O G R A M
0
M E N U
ENT
4, a, 5, b
RETURN
Hide quick links:
Advertisement
Table of Contents
