Transport - Husqvarna RZ4621 CA Operator's Manual

Hide thumbs Also See for RZ4621 CA:
Table of Contents

Advertisement

Allow the machine to cool before putting it in
storage.
Regularly clean deck and underside of deck,
avoid spraying engine and electrical components
with water.

Transport

the machine is heavy and can cause serious
crushing injuries. be extra cautious when it is
loaded on or unloaded from a vehicle or trailer.
Use an approved trailer to transport the
machine. Activate the parking brake, turn off
the fuel supply, and fasten the machine with
approved fastening devices, such as bands,
chains, or straps, when transporting.
Do not operate this machine on public
roadways.
Check and abide by local traffic regulations
before transporting the machine on any road.
IMPORTANT INFORMATION
The parking brake is not sufficient to lock the
machine in place during transport. Ensure that
the machine is well fastened to the transport
vehicle. Always reverse the machine onto the
transport vehicle to avoid tipping it over.
Do not tow this machine, it may cause damage
to the drive system.
Do not tow any trailers, etc. with this mower.
they may jackknife or overturn causing
damage to the mower and possibly serious
injury to the operator.
load the unit onto truck or trailer by driving up
ramps of suitable strength using a slow speed.
Do not lift! the machine is not intended to be
lifted by hand.
16
SAfety
Regularly clean deck
WARNING!
Escaping hydraulic oil under
pressure can have sufficient force
to penetrate the skin, causing
serious injury. If injured by escaping
fluid, see a doctor at once. Serious
infection or reaction can develop
if proper medical treatment is not
administered immediately.
WARNING!
This mower is equipped with an
internal combustion engine and
should not be used on or near any
unimproved forested, bush covered
or grassy lands unless the engine's
system is equipped with a spark
arrester meeting applicable local or
state laws (if any). If a spark arrester
is used, it should be maintained
in effective working order by the
operator.
8011-514

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents