Table of Contents
Advertisement
11. Configuration
4. Enter the password of your network.
5. Tap "Multicast" followed by "Confirm" to complete.
6. The radio will start associating with the network and followed with the
message "Association complete" if network is successfully connected.
Remove AP - If you have already added a router and want to remove it, choose this
option.
Note - Always bring the Tuner within 2 meters of the Wi-Fi router for setup.
• AP:[]
If you have added more than one routers on the radio and want to switch to
another one, select this option to change.
• Signal
This is to show the strength of the Wi-Fi Signal of the Wi-Fi router as received by the
radio. Usually signal levels lower than -70dBm is at weaker level and if it affects the
reception of your radio, you may need to optimize the router location or check any
problem of the router itself.
1
2
-17-
Advertisement
Table of Contents
