Table of Contents
Advertisement
8. Bluetooth playback
Before transmission between your Bluetooth device and the radio is possible, both devices
must be coupled. This process is called "pairing". The Tuner is served as a receiver, to
receive music stream to play on the Tuner.
If you have already coupled to a Bluetooth device before, this connection will be restored
automatically when both devices are in range and Bluetooth operation has been selected
on the radio. "Pairing" does not have to be repeated. This function may need to be
activated in your Bluetooth device, however.
• Push the Menu button to display the selection menu for the different operating
modes.
• Use the up / down button to select the operating mode Bluetooth and push the dial
switch.
• Switch your Bluetooth device to which you want to connect the radio on and
activate the pairing mode here. The device scans for Bluetooth devices in the
reception range.
• When the radio is found, your Bluetooth device shows its name A2696A-XXXX (the
XXXX is an identification code for your radio unit).
• Select the radio at your Bluetooth device.
• Start playback on your Bluetooth device.
• Playback now takes place using the radio.
-13-
Advertisement
Table of Contents
