Table of Contents
Advertisement
7. FM Radio
To receive the ordinary FM stations (no internet connection is required), connect the wire
antenna (supplied in the box) to the antenna jack on the rear cabinet first. Place the
Tuner close to the window and extend the antenna as far as it can go to get the best
reception.
On the main menu, scroll to FM Radio or use the [Mode] button on remote to switch to
FM Radio. Press [OK] to start.
It will ask whether you want to Scan FM Station. Press OK to start scanning and it will
show the progress on the number of channels are found. When it is done, it will
automatically save the found channels on presets and display the list for your action.
You can select the channel and start listening to it. Whenever you want to add to My
Favourite, press the
button and it will add to the favourite list.
Always press the [ ◄ ] button (or [Back/ ◄ ] button on the unit) to return to the
Preset list.
Note - When it is playing FM radio, press the [ ►] button to view more radio information,
each time you press the [ ► ] button, it will display various information at a time such as
radio frequency and big clock display.
Manual Tune
To manual tune to the frequency, long press the [OK] on remote or long press
[Tune/Select] on the unit, until you see the "Tuning" appeared on the display, at the
bottom right corner.
Use the < ◄ /► > button on remote to tune the frequency. When done, long press the
[OK] button to exit manual tune.
-12-
Advertisement
Table of Contents
