Configuration - Redback A 2696A User Manual

Internet radio tuner
Table of Contents

Advertisement

Here you will find the complete settings / options available to configure your own tuner.
On the main menu, navigate to Configuration setting. Press OK and you will see a list of
options available.
Network
• Network Options
Always on: The WLAN function remains switched on (faster access when
switching from DAB or FM mode to Internet radio).
Auto off in 30s: The WLAN function shuts down after 30 seconds when not in use (to
save energy).
• Wi-Fi Channels
Not all of the Wi-Fi channels are available in every country. There may be variation
between different countries. Therefore it is necessary to choose the Wi-Fi channels to
ensure the Wi-Fi performs satisfactory.
We have already set the channels according to the requirement in different
countries. Choose the country you are staying from the list to get the correct
channel.
The Europe/United Kingdom is set by default, press [OK] on the Remote control or
push the [Tune/Select] knob to edit the country selection.
• Wi-Fi Network
• Add / Remove AP
Add AP - It will scan out a list of routers around.
Add AP (WPS button) - Choose this option to connect your Wi-Fi router via WPS if the
router has a WPS button.
Add AP (SmartConfig) - Choose this option to configure the W-Fi network with a smart
Have your smart phone connected to the Wi-Fi network which the radio will be
connected to.
It is recommended to place the radio within 2 meters from the router for better
successful rate.
Follow the steps below:
1. On the radio, navigate to Configuration > Network > Add/Remove AP > Add AP
(SmartConfig), press OK to confirm
2. Launch the App on your smart phone
3. The name of the SSID (your Wi-Fi network) will show up as follow:
phone through an app. It is available on iOS App Store and
android play store. Search and install the app "Esptouch".
-16-

11. Configuration

Advertisement

Table of Contents
loading

Table of Contents