Table of Contents
Advertisement
Locating a specific point in a track
— Manual Search
During playback, push the SEEK/AMS
control up or down and hold.
Release when you have found the
desired point.
To search forward
To search backward
Note
If "
" or "
display, you have reached the beginning or the
end of the disc and you cannot go any further.
Playing a CD in various
modes
Playing tracks repeatedly
— Repeat Play
Press (1) during playback.
"REP" appears in the display.
When the currently played track is over, it will
be played again from the beginning.
To cancel this mode, press again.
Playing tracks in random order
— Shuffle Play
Press (2) during playback.
"SHUF" appears in the display.
To cancel this mode, press again.
SEEK/AMS
" appears in the
Radio
Memorizing stations
automatically
— Best Tuning Memory (BTM)
This function selects from the currently
received band the stations with the strongest
signals and memorizes them in order of their
frequency.
PREVENTING ACCIDENTS!
When tuning in while driving, use the
automatic tuning instead of manual tuning.
1
Press (SOURCE) repeatedly to select the
tuner.
Each time you press (SOURCE), the mode
changes as follows:
CD ˜ TUNER
2
Press (MODE) repeatedly to select the
band.
Each time you press (MODE), the mode
changes as follows:
" FM I
" FM II
3
Press (BTM/SENS) for two seconds.
The unit stores stations in the order of their
frequencies on the number buttons.
Notes
• The unit does not store stations with weak
signals. If only a few stations are received, some
number buttons remain empty.
• When a number is indicated in the display, the
unit starts storing stations from the one currently
displayed.
• If a CD is not in the unit, only the tuner band
appears even if you press (SOURCE).
" FM III
" AM
EN
7
Advertisement
Table of Contents
