Cleaning And Maintenance; Technical Specifications - EuroLite Flame-Light FL-201 User Manual

Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 5 minutes).
During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's
notes!
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the device
was not designed for. Damages caused by non-observance are not subject to warranty.
For the installation, you need two 12 V/15 W MR-11 lamps.
During operation, the lamp reaches temperatures of up to 95° C.
Procedure:
Step 1: If replacing the lamps, remove the old lamps from the lamp-socket.
Step 2: Insert the new 12 V/15 W MR-11 lamps into the lamp-socket.

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device except for the lamps. Maintenance and service operations
are only to be carried out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
Dimensions (LxWxH):
Weight:
Please note: Every information is subject to change without prior notice. 08.05.2012 ©
The lamp has to be replaced when it is damaged
or deformed due to the heat!
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
:
a
(steady state): 95° C
C
CAUTION!
230 V AC, 50 Hz
29 W/34 VA
45° C
0.5 m
0.5 m
285 x 195 x 195 mm
0.6 kg
11/11 00069525.DOC, Version 1.0