Table of Contents
Advertisement
Input Blocks
Gyro Sensor
The gyro sensor is an ideal block for motion and posture detection of your creation. It can be used to measure
the angular rate and the acceleration information of your creation. When it detects a vibration, the sensor will
send out an on signal.
Reference coordinates:
Z-axis
X-axis
Y-axis
Try it now!
1. Press the power button to turn on the chain.
2. Put the block on the desk and thump the desk. The buzzer will activate when the
gyro sensor detects any vibration.
3. Pick up the blocks and rotate it, see what happens.
Detect a vibration:
Thump
Send out an
on signal
09
Advertisement
Table of Contents
Need help?
Do you have a question about the neuron Inventor Kit and is the answer not in the manual?
Questions and answers