Advertisement
Zeta Computer Desk
Model # ZTCD-B Black Finishing Wood
# ZTCD-W White Finishing Wood
ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP
POINTS, SHARP EDGES AS RECEIVED
If you have any questions regarding assembly or parts are missing, DO NOT return this item to the store
where it was purchased. Please call our toll-free customer service number and have your instructions and parts
list ready to provide the model name, part name or factory number:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
®
Golden Oak
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday to Friday
Or visit our web site www.goldenoak.com
Or e-mail your request to parts@whalenfurniture.com
1-866-942-5362
Page 1
LOT NUMBER:
DATE PURCHASED: / /
Factory No. 16598
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Whalen Furniture Golden Oak ZTCD-B
Summary of Contents for Whalen Furniture Golden Oak ZTCD-B
- Page 1 LOT NUMBER: DATE PURCHASED: / / Zeta Computer Desk Model # ZTCD-B Black Finishing Wood # ZTCD-W White Finishing Wood ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED If you have any questions regarding assembly or parts are missing, DO NOT return this item to the store where it was purchased.
- Page 2 Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture.
- Page 3 Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- Wood Top Frame (1) B- Glass Top (1) C- Left Wood Leg (1) D- Right Wood Leg (1) E- Metal Leg (2) F- Bottom Stretcher (1) (1) 3/4”...
- Page 4 Assembly Instructions NOTE: Please do not fully tighten all bolts until you finish assembling all parts, then go back and fully tighten all bolts. This will make the assembly easier. 1. Unpack the unit and confirm that you have all the hardware and required parts. 2.
- Page 5 Assembly Instructions 6. Pull out the Keyboard Tray and insert two 1-1/4” Bolts (2) with the Washers (4 and 5) from inside of the Wood Top Frame (A) through the drilled holes on the side rails and screw into the threaded inserts on both Wood Legs (C &...
- Page 6 Assembly Instructions 8. Snugly fit the Bottom Stretcher (F) between the drilled holes on the 2 Metal Legs (E). Apply pressure to the Metal Legs, if necessary. Insert one 1-3/4” Bolt (3) with the Lock Washer (4) and Camber Washer (7) through each Metal Leg (E) and screw into the inserted nut in the Bottom Stretcher (F).
- Page 7 Assembly Instructions 10. Ask for assistance to stand the unit upright and position it at the desired location. 11. Position the Glass Top (B), with the black side of glass down, onto the Wood Top Frame (A). NOTE If the glass top is scratched, you can minimize the damage by using a BLACK marker and filling in scratched area from underneath.
Need help?
Do you have a question about the Golden Oak ZTCD-B and is the answer not in the manual?
Questions and answers