■ If operating a power tool in a damp location is IMPORTANT! unavoidable, use a residual current device (RCD) It is essential that you read the instructions in this manual protected supply. Use of an RCD reduces the risk of before assembling, operating, and maintaining the electric shock.
tool repaired before use. Many accidents are caused ■ Ambient temperature range for tool storage is between by poorly maintained power tools. 0°C and 40°C. Keep cutting tools sharp and clean. Properly ■ ■ The recommended ambient temperature range for the maintained cutting tools with sharp cutting edges are charging system during charging is between 10°C and less likely to bind and are easier to control.
SYMBOLS ON THE PRODUCT Lock Safety Alert Unlock Volts No-load speed Speed, minimum min¹־ Revolutions or reciprocations per minute Direct current Speed, maximum Please read the instructions carefully before starting the machine. Regulatory Compliance Mark (RCM). Product Stop the product. meets applicable regulatory requirements.
Page 5
Direction of rotation selector Square head (9.5mm (3/8”)) Rotating collet LED lights Lock out lever Switch trigger Handle, insulated gripping surface Battery port Socket bit User manual Battery Charger Know your product...
3/8" Ratchet wrench standardised test and may be used to compare one tool with Model RRW18X another. They may be used for a preliminary assessment of exposure. Voltage 18 V...
Page 12
Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149 Melbourne, Australia Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand RYOBI is a trade mark of Ryobi Limited, and is used under license. 961075749-01...
Need help?
Do you have a question about the RRW18X and is the answer not in the manual?
Questions and answers