Advertisement
Transporting the Printer
When transporting the printer for relocation, moving, etc. over a long distance or by use of a
transportation means (airplane, train, automobile, etc.) accompanied by vibrations, be sure to make
preparations following the procedure described below.
Initiating [Preparation for Transporting the Printer] from the Printer Driver
Remove ink from the printer so that ink does not leak during
Important
• Administrative privileges may be required to configure printer settings. For more details, see
"Using Utility Features" in the User's Guide.
• When printing is in progress or any error has occurred, [Preparation for Transporting the Printer]
cannot be initiated.
• Close the Status Monitor if it is running.
• In a printer sharing environment, do not launch the Status Monitor on the client when working
on a server, or launch it on the server when working on the client. The process may not complete
correctly if the Status Monitor is running.
• Initiating "Preparation for Transporting the Printer" consumes ink. Initiate the procedure only when
necessary.
• In order to initiate "Preparation for Transporting the Printer" the ink tanks must be installed
properly. After the initiation process is complete, you will be instructed to remove the ink tanks.
If the ink tanks are removed before this process is complete, ink may leak from the ink tank slots and
may stain your hands, clothes, and surrounding work area.
10
transporting
.
Advertisement
