Exposure Correction - Sanyo Xacti VPC-S6 User Manual

EXPOSURE CORRECTION

When capturing images, you can make the image lighter or darker.
1
Point the camera lens at the
subject.
h If the Mode Select Screen or a
menu screen (Shooting Setting
Screen) is active, press the MENU
button to exit it.
2
With the Shooting Setting Screen
not showing, press the [m] (
button.
h The exposure correction bar
appears.
3
Press the [l] or [m] button to
adjust the exposure.
h The exposure setting numerical
value is shown at the left end of
the exposure bar. The exposure
can be set to a value from –1.8EV
to +1.8EV.
h To cancel the exposure correction
bar, press the MENU button.
h The exposure correction setting
can also be accessed from the
Shooting Setting Screen
(page 52).
HINT
The exposure correction setting is canceled in the following cases:
i When the pointer is set to the center position.
i When the Option Screen is accessed.
i When the playback button [=] is pressed.
i After the power is turned off.
39
English
)
[l] button
Exposure correction bar
[m] button
12
Pointer