Table of Contents
Advertisement
DATE AND TIME SETTING
h If "DISP OFF" is selected, the date the image was captured is not
shown during playback.
4 Press the SET button.
8
Select "EXIT", and press the SET button.
h The date and time setting is completed, and you are returned to the
Option Screen.
h To return to the Shooting Screen, press the MENU button.
HINT
i Under normal conditions, while the batteries are being replaced, an
internal battery will maintain the date and time settings. However, there is a
small chance the settings may be lost. (The backup will last for about 7
days.) It is recommended to check that the date and time settings are still
correct after replacing the batteries and before shooting or recording of any
type (follow steps 1 and 4).
To correct the date and time settings
i After steps 1 and 4, select the line of the setting that you want to change,
press the SET button, and follow the steps in the respective paragraphs
above to change the setting.
21
English
Advertisement
Table of Contents
