Troubleshooting - Sanyo Xacti VPC-J4EX Instruction Manual

TROUBLESHOOTING

Before taking your camera to the repair shop, check the following table for a
possible solution to the problem.
No power.
Power
The digital
camera turns
off by itself.
An image is
not captured
when the
Shooting
shutter release
button is
pressed.
Problem
The battery
pack is dead.
The battery
pack has not
been inserted
correctly.
The battery
compartment
cover is not
fully closed.
The power
save function
is operating.
The power is
not turned on.
Cause
Change or
recharge the
battery pack.
Reinsert the
battery pack,
making sure to
orient it
correctly.
Close battery
compartment
cover properly.
Turn on the
camera again.
Turn on the
power.
Reference
Action
page
29, 32
English
34
33
166