Sanyo Xacti VPC-J4EX Instruction Manual page 90

WHITE BALANCE SETTING
Setting procedure
1 Select the
h The
2 Fill the entire screen with a plain white card (or piece of paper, etc.),
and perform step 3.
3
Press the SET button.
h This completes the white balance setting.
h Once the white balance setting is programmed for the
retained even if another white balance setting (
or ) is selected. If you changed to another setting, whenever you
select the
grammed setting is recalled.
HINT
To cancel the white balance setting
i Perform step 2, select
87
English
icon and press the SET button.
icon moves to the left end of the line.
icon and press the SET button, the previously pro-
, and then press the SET button.
icon, it is
, , , ,