Installing And Removing The Cards - Sanyo VPC-SX560E Instruction Manual

INSTALLING AND REMOVING THE CARDS

The images and audio recordings recorded by your digital camera are stored on the data storage
card installed in the digital camera. You must install a card before you can capture images. For
more information on handling the cards, see "Cautions when handling the CompactFlash or
Microdrive" on page 12 and "Cautions when using the Microdrive" on page 135. Before using a
card for the first time, format it using the digital camera (see page 122).
Installing a Card
1
Set the main switch to "MONITOR OFF" or "CAMERA."
2
Close the lens cover.
3
Make sure the power is turned off, then open the card
slot cover on the bottom of the digital camera.
4
Insert the card.
œ Make sure the contacts are facing downward and insert
the card in the direction shown by the arrow (l mark).
œ Be sure to insert the card all the way until it is fully
inserted.
5
Push down the eject button and close the card slot
cover.
œ When a card is inserted, the eject button will stand up.
Push down the eject button in the direction indicated by
the arrow.
25
English
Eject button
CAMERA
PLAY
MONITOR OFF
Main switch
Card slot cover