Quick Start For Capturing Images - Sanyo VPC-SX560E Instruction Manual

QUICK START FOR CAPTURING IMAGES

Now that you have purchased a new digital camera, it is time to try and capture some images and
then view them with the LCD monitor. Although your digital camera is packed with many useful
and convenient functions, here is just a simple explanation of how to capture and view images.
Afterward, carefully read the rest of this manual to get the most out of your digital camera.
Recharging the batteries (see page 21)
Recharge the supplied batteries before use.
1
Recharge the supplied batteries.
œ Make sure the polarity ((+), (–)) of the batteries is as
indicated on the battery charger.
œ During recharge, the recharge indicator on the battery
charger will light.
œ When the batteries are recharged, the indicator will go
off.
œ The recharge time is approx. 210 minutes for four
batteries. (Model NC-LC03WSA only)
œ The recharge time is approx. 240 minutes for four
batteries. (Model VAR-NC1 only)
Caution!
First recharge the supplied batteries. Do not recharge other
batteries with the supplied battery charger. To ensure safety,
read "Concerning the Batteries" on page 5 and "Concerning
the Supplied Battery Charger" on page 7.
2
Remove the batteries from the battery charger.
œ When finished (the recharge indicator turns off), unplug the power cord from the power
outlet and remove the batteries.
15
English
Recharge
indicator
Model NC-LC03WSA
Recharge
indicator
Model NC-LC03WSA
Recharge
indicator
Model VAR-NC1
Recharge
indicator
Model VAR-NC1