HP t628 Troubleshooting Manual page 13

To use the thin client in the horizontal orientation:
●
a. Position the thin client right-side up and locate the two screw holes in the grid.
b. Position the stand over the thin client and line up the captive screws in the stand with the
screw holes in the thin client.
c. Tighten the captive screws securely.
7. Reconnect external devices, reconnect the power cord, and then turn the thin client on.
NOTE: Be sure that at least 10.2 centimeters (4 inches) of space on all sides of the thin client remain
clear and free of obstructions.
8. Lock any security devices that were disengaged when the thin client cover or access panel was removed.
NOTE: An optional Quick Release mounting bracket is available from HP for mounting the thin client to a
wall, desk, or swing arm. When the mounting bracket is used, do not install the thin client with the I/O ports
oriented towards the ground.
Attaching the stand 7