Adjusting The Convergence (Convergence) - Sony KP-EF48 Operating Instructions Manual

Adjusting the
convergence
(CONVERGENCE)
Before you use the projection TV, adjust convergence.
The projection tube image appears on the screen in
three layers (red, green and blue). If they do not
converge, the color is poor and the picture blurs. To
correct this, adjust convergence.
After 20-30 minutes of turning on the power, adjust
convergence.
Adjusting the convergence
automatically
3
L(MONO)
Press on the TV.
The auto convergence function works for about 30
seconds.
Adjusting the convergence manually
When the auto convergence function does not work
correctly with , adjust convergence by selecting
CONVERGENCE of the FEATURES menu.
1
Press MENU.
2
Press V or v to move the cursor (z) to the
FEATURES menu (
ENTER
U
PROGR R
R ENTER MENU
/
), and press ENTER.
F E AT URES
GAME MODE
HYPER S URROUND :
ENTER
OF F
AV OUT :
MON I TOR
CONVERGENCE
3
Press V or v to move the cursor (z) to
CONVERGENCE and press ENTER.
The CONVERGENCE adjustment screen appears.
R
G
B
R=Red
R
G=Green
G
B=Blue
B
4
Press V or v to move the cursor (z) to the
symbol showing the line you want to
adjust, and press ENTER.
: Red vertical line (left/right adjustment)
: Red horizontal line (up/down adjustment)
: Blue vertical line (left/right adjustment)
: Blue horizontal line (up/down adjustment)
5
Press V or v to move the line until it
converges with the center green line, and
press ENTER.
R
G+B
(Light blue)
R
G+B
(Light blue)
To move up/right, press V.
To move down/left, press v.
6
Repeat steps 4 and 5 to adjust the other
lines until all three lines converge and are
seen as a white cross.
7
Press MENU to return to the normal screen.
17
-EN
Getting Started