Using Wi-Fi
Local Area Network (LAN) Connection
This mode of connection enables access to the web functions of this camera
from devices such as a smartphone, tablet terminal or PC that is within the
same Local Area Network (LAN).
Connection Adapter Settings and Camera Connection
o
1
Launch the wizard screen and tap 1.
"Preparation on the Camera" (A p. 79)
Available Adapter
.
2
Select "Connect with Access Point", followed by tapping 1.
Connect with Access Point
.
3
Select "In-network Connection", followed by tapping 1.
In-network Connection
.
4
Select the method of configuration and tap 1.
Configure WPS here.
WPS
.
5
Press the WPS button on the access point.
For more information, please refer to the instruction manual of the
access point.
6
Tap "WPS".
WPS Setup
Press the WPS Button
on the Access Point
then Touch the WPS Button
.
84
Wireless LAN
WPS
7
A connection successful screen appears.
Connected
Successfully Connected.
Completed the Setup Wizard.
.
For non-WPS, information such as SSID, type of encryption,
passphrase and IP address ("DHCP" or "Manual") also need to be
configured.
Memo :
It is also possible to configure the connection settings in the "Settings" tab
0
after direct connection is established and upon access to the main page
of the camera via the web browser. "Changing Connection Settings"
(A p. 94)
DONE