Changing The Mode Of Time Code (Tc) Recording - JVC EverioR GZ-RY980 Detailed User Manual

Changing the Mode of Time Code (TC)
Recording
The time code data is recorded together with the video.
The time code is displayed on the LCD monitor screen during playback or
recording.
1
Tap "MENU".
SLOT
PLAY
.
2
Select "TC" with 3 or 2, followed by tapping "SET".
TC...
.
3
Select "TC Generator" with 3 or 2, followed by tapping "SET".
TC Generator
.
4
Select a setting value with 3 or 2, followed by tapping "SET".
.
STBY TC 00 : 00 : 00 . 00
2018 - 01 - 01
02 : 23 : 01
REC MENU
Rec Run
Free Run
Rec Run
Regen
5
Start recording.
.
SLOT SLOT
PLAY PLAY
.
Press the START/STOP button again to stop recording.
0
Setting
Free Run The time code advances at all times regardless of the
recording status. The time code advances even when this
unit is turned off.
Rec Run The time code advances only when recording is in
progress. It continues to run in the order of the recorded
scenes as long as the SD card is not replaced. If the SD
card is removed and recording is made on another card,
time code will be recorded on the new card from where it
was left off in the previous card.
Regen The time code advances only when recording is in
progress. When the SD card is replaced, the last time
code recorded on the card is read and recorded on a new
card so that the time code continues in running order.
Memo :
When "Rec Mode" is set to "Time-Lapse Rec" and "TC Generator" to "Free
0
Run", the Rec Run mode is activated.
When "System" is set to "HD" and "Rec Mode" to "Pre Rec", the Free Run
0
mode is activated.
Recording
REC TC 00 : 00 : 00 . 10
2018 - 01 - 01
02 : 23 : 01
REC MENU
Description
47